INFI

Installation resources

INSTALLATION & SETUP

Installation Guide

T3 3D K4 3D K5 3D

Installation animations

Select your product type. Only published animations are shown.

Estimated installation time: approximately 30 minutes.

K4 Wall-Mount Installation

Estimated installation time: approximately 30 minutesPlanning estimate, not a measured installation time. Actual time depends on the installer and site conditions. Wall reinforcement, drilling preparation and cable work may take longer.

Download

K4 Stripe Reader Installation

Download video

K4 Square Terminal Installation

Download video

K4 mounting and service access

Structural support: Have a qualified installer verify that the wall and fixings can safely support the complete K4, wall bracket and attached accessories. Reinforce the wall where required.
Wall material: Do not attach the bracket to plasterboard/drywall alone. Framed or hollow walls need suitable structural fixing points or designed backing. Concrete or masonry must be sound, with anchors selected for that specific substrate.
Before drilling: Check for concealed electrical cables, pipes and other services. Use the actual bracket as the fixing template and keep it level.
Access and clearance: Allow room to hang the unit, operate both key locks, route cables without pinching them and access the unit for service.

Wall-anchor type, drilling depth, tightening torque and required load capacity must be confirmed for the actual wall by the installer. Device-assembly screws shown in the video are not a universal wall-anchor specification.

Open this K4 guide on your phone

Scan to open K4 Wall-Mount Installation directly.

https://installation.infi.us/k4-wall-mount-installation/

Download QR code

Square Terminal installation and power connection

Download

Stripe Reader installation and power connection

Download

Lane 3600 installation

Download

Clover Flex Pocket installation

Download

Floor-standing installation instructions

All 9 pages are displayed below. Tap a page to enlarge it, or download the PDF in the QR cards section below.

K5 installation guide — page 1 of 9 — Page 1 of 9

K5 installation guide — page 2 of 9 — Page 2 of 9

K5 installation guide — page 3 of 9 — Page 3 of 9

K5 installation guide — page 4 of 9 — Page 4 of 9

K5 installation guide — page 5 of 9 — Page 5 of 9

K5 installation guide — page 6 of 9 — Page 6 of 9

K5 installation guide — page 7 of 9 — Page 7 of 9

K5 installation guide — page 8 of 9 — Page 8 of 9

K5 installation guide — page 9 of 9 — Page 9 of 9

Floor-standing K5 — three main components

Main unit · Column · Floor base

Rotate the models, zoom in, and switch between individual components and the assembled kiosk.

Download PDF

QR cards — optional downloads

Choose a separate Chinese or English card. Both open this installation page.

中文版二维码

预览 · 下载 PNG

English QR card

Preview · Download PNG

Installation Guide

Installation animations

1. Base and column installation

K5 Main Unit Installation

K5 Main Unit Installation - Internal Tray

3. Payment bracket installation

K5 Countertop

K5 Wall Mount

Counter-edge Installation

Full-countertop Installation with Adapter Plate

K5 Display Unit - Wall Mount

K5 Printer Installation

K5 27-inch Printer Installation

K5 / K5 27-inch Scanner Installation

K4 Floor-Standing Installation

K4 Stripe Reader Installation

K4 Square Terminal Installation

K4 Wall-Mount Installation

K4 Stripe Reader Installation

K4 Square Terminal Installation

Square Terminal installation and power connection

Stripe Reader installation and power connection

Lane 3600 installation

Clover Flex Pocket installation

Display Unit — Payment bracket installation

Display Unit — Square Terminal installation and power connection

Display Unit — Stripe Reader installation and power connection

Display Unit — Lane 3600 installation

Display Unit — Clover Flex Pocket installation

Floor-standing installation instructions

Floor-standing K5 — three main components

QR cards — optional downloads

中文版二维码

English QR card